Publications

publications header

As the nation’s premier research laboratory, Oak Ridge National Laboratory is one of the world’s most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America’s manufacturing industries.

 

Date Published Publication Title File Authors
Date Published Publication Title File Authors
03/19/10 Nanotechnology, Volume 21, Number 11 Processing of loose carbon nanotubes into isolated, high density submicron channels. Hendricks TR1, Ivanov IN, Schaeffer DA, Menchhofer PA, Simpson JT.
03/01/12 IEEE Future of Instrumentation International Workshop (FIIW), 2012 Direct Digital Additive Manufacturing Technologies-Path Towards Hybrid Integration Pooran C. Joshi, Ryan R. Dehoff, Chad E. Duty, William H. Peter, Ronald D. Ott, Lonnie J. Love, And Craig A. Blue
03/04/12 Composite Part A, 43: 1120-1133 Properties of Thermo-Chemically Surface Treated Carbon Fibers and of their Epoxy and Vinyl Ester Composites F. Vautard, S. Ozcan, H. Meyer
05/01/12 Journal of the Minerals and Materials Society, Volume 64, Issue 5, pp 566-571 Titanium Sheet Fabricated from Powder for Industrial Applications W. H. Peter, T.r. Muth, W. Chen, Y. Yamamota, B.c. Jolly, N. Stone, G.m.d. Cantin, J. Barnes, M. Paliwal, R. Smith, J. Capone, A.l. Liby, J.c. Williams, C.a. Blue
07/05/12 Journal of Alloys and Compounds The Investigation of Die-Pressing and Sintering Behavior of ITP CP-Ti and Ti-6Al-4V Powders W. Chen, Y. Yamamoto, W.h. Peter, M.b. Clark, S.d. Nunn, J.o. Kiggans, T.r. Muth, C.a. Blue, J.c. Williams, K. Akhtar
07/25/12 Green Chemistry, Volume 14, Number 12, pp 3239-3454 Turning Renewable Resources into Value-Added Polymer; Development of Lignin-Based Thermoplastic Tomonori Saito, Rebecca H. Brown, Marcus A. Hunt, Deanna L. Pickel, Joseph M. Pickel, Jamie M. Messman, Frederick S. Baker, Martin Keller, And Amit K. Naskar
08/28/12 Applied Surface Science, 261: 473-480 Influence of the Carbon Fiber Surface Microstructure on the Surface Chemistry Generated by a Thermo-Chemical Surface Treatment F. Vautard, S. Ozcan, F. Paulauskas, J. Spruiell, H. Meyer, M. Lance
09/12/12 Journal of Microscopy, Vol. 248 Sample Preparation and Image Acquisition Using Optical-Reflective Microscopy in the Measurement of Fiber Orientation in Thermoplastic Composites G.M. Velez-garcia, P. Wapperom, V. Kunc, D.G. Baird, & A. Zink-sharp
09/21/12 Composite Part A, 45, 162-172 Influence of Thermal History on the Mechanical Properties of Carbon Fiber Acrylate Composites Cured by Electron Beam and Thermal Processes F. Vautard, S. Ozcan, L. Poland, H. Meyer, M Nardin
10/08/12 Future of Instrumentation International Workshop (FIIW) Automating and Accelerating the Additive Manufacturing Design Process with Multi-Objective Constrained Evolutionary Optimization and HPC-Cloud Computing Mark A. Buckner And Lonnie J. Love
11/28/12 Journal of the Electrochemical Society, 160 Lithium Ion Cell Performance Enhancement Using Aqueous LiFePO4 Cathode Dispersions and Polyethyleneimine Dispersant Jianlin Li, Beth L. Armstrong, Jim Kiggans, Claus Daniel, And David L. Wood, Iii
11/29/12 Wear: International Journal on the Science and Technology of Friction, Lubrication and Wear Development of a Two-Body Wet Abrasion Test Method with Attention to the Effects of Reused Abradant P.J. Blau And R. R. Dehoff
12/12/12 Journal of Power Sources 229 (2013) 239-248 Structural Transformation of a Lithium-Rich Cathode During High Voltage Cycling Resolved by In Situ X-Ray Diffraction Debasish Mohanty, Sergiy Kalnaus, Roberta A. Meishner, Kevin J. Rhodes, Jianlin Li, E. Andrew Payzant, David L. Wood Iii, Claus Daniel
01/01/13 MS&T Conference Prediction of Material Thermal Properties and Beam-Particle Interaction at Meso-Scale during Electron Beam Additive Manufacturing Chen, Jian; Zheng, Lili; Feng, Zhili; Zhang, Wei; Dehoff, Ryan
01/05/13 Journal of Power Sources Volume 222, Pages 461–466 Self-organized amorphous TiO2 nanotube arrays on porous Ti foam for rechargeable lithium and sodium ion batteries Zhonghe Bia, M. Parans Paranthamana, Paul A. Menchhoferb, Ryan R. Dehoffb, Craig A. Bridgesa, Miaofang Chib, Bingkun Guoa, Xiao-Guang Suna, Sheng Daia
03/01/13 Advanced Materials and Processes, Vol. 171, Issue 3, pp 23-27 Neutron Characterization for Additive Manufacturing Thomas Watkins, Hassina Bilheux, Ke An, Andrew Payzant, Ryan Dehoff, Chad Duty, William Peter, And Craig Blue
03/01/13 Advanced Materials & Processes, Volume 171, Issue 3 Additive Manufacturing of Aerospace Brackets Ryan Dehoff; Chad Duty; William Peter; Yukinori Yamamoto; Wei Chen; Craig Blue
03/01/13 Advanced Materials and Processes, Vol.171, Issue 3, pp 15-17 Out of Bounds Additive Manufacturing C. Holshouser, C. Newell, S. Palas, C. Duty, L. Love, V. Kunc, R. Lind, P. Lloyd, J. Rowe, R. Dehoff, W. Peter, C. Blue
04/12/13 Composites Part A: Applied Science and Manufacturing Vol.51 A Model for Fiber Length Attrition in Injection-Molded Long-Fiber Composites Jay H. Phelps, Ahmed I. Abd El-rahman, Vlastimil Kunc, Charles L. Tucker Iii
05/22/13 Thermosense: Thermal Infrared Applications XXXV Thermographic In-Situ Process Monitoring of the Electron Beam Melting Technology used in Additive Manufacturing Ralph B. Dinwiddie, Ryan R. Dehoffa, Peter D. Lloyda, Larry E. Lowea And Joe B. Ulrichb
05/22/13 Thermosense: Thermal Infrared Applications XXXV, Real-time Process Monitoring and Temperature Mapping of a 3D Polymer Printing Process Ralph B. Dinwiddie, Lonnie J. Love, And John C. Rowe
05/22/13 Applied Physics Inkjet Printing of Quantum Dots in Photopolymer for Use in Additive Manufacturing of Nanocomposites Amelia M. Elliott, Olga S. Ivanova, Christopher B. Williams, Thomas A. Campbell
06/13/13 Carbon 62 Wear of Carbon Fiber Reinforced Carbon Matrix Composites- Study of Abrasive, Oxidative Wear and Influence of Humidity Soydan Ozcan And Peter Filip
06/17/13 International Journal of Fluid Power Freeform Fluidics Dehoff, Ryan R.; Love, Lonnie; Lind, Randall; Richardson, Bradley; Lowe, Larry; Peter, William; Klarner, Andrew
08/10/13 Conference on Small Satellites The Use of Additive Manufacturing for Fabrication of Multi-Functional Small Satellite Structures Brian J Horais, Lonnie J Love, Ryan R Dehoff
08/29/13 Physical Chemistry Chemical Physics Issue 44, 2013 Correlating Cation Ordering and Voltage Fade in a Lithium-Manganese-Rich Lithium-Ion Battery Cathode Oxide. A Joint Magnetic Susceptibility and TEM Study Debasish Mohanty, Athena S. Sefat, Jianlin Li, Roberta A. Meisner, Adam J. Rondinone, E. Andrew Payzant, Daniel P. Abraham, David L. Wood Iii, And Claus Daniel
11/01/13 Advanced Engineering Materials 2013, 15, No. 10 Inkjet Printing of Quantum Dots in Photopolymer for Use in Additive Manufacturing of Nanocomposites Amelia M. Elliott, Olga S. Ivanova, Christopher B. Williams, And Thomas A. Campbell
11/05/13 Prepared for Doctoral Dissertation, Virginia Tech Structure-Property Relationships in Flow Formed Discontinuous Fiber Reinforced Composites Vlastimil Kunc
11/13/13 Applied Surface Science, 268: 61-72 Stability of Carbon Fiber Surface Functionality at Elevated Temperatures and its Influence on Interfacial Adhesion F. Vautard, P. Grappe, S. Ozcan
11/25/13 Applied Physics Letters Thermoelectric and mechanical properties of multi-walled carbon nanotube doped Bi0.4Sb1.6Te3 thermoelectric material Fei Ren, Hsin Wang, Paul A. Menchhofer, and James O. Kiggans
03/17/14 Journal of Applied Physics 9T High Magnetic Field Annealing Effects on FeN Bulk Sample jiang, Yanfeng,dabade, Vivekanand Brady, Michael P. Rios, Orlando James, Richard Wang, Jian-ping
05/01/14 Advanced Engineering Materials Magneto-Acoustic Processing Induced Alignment and Structure Modification of Light-Metal-Matrix Nanocomposites Hunter B. Henderson, Orlando Rios, Zachary L. Bryan, Cody P. K. Heitman,gerard M. Ludtka, Gail Mackiewicz-ludtka, Alexander M. Melin And Michele V. Manuel
05/15/14 Conference: 8th-Annual SPE Automotive Composites Conference & Exhibition (ACCE), Techniques and Result for Fiber Length Distribution Determination as a Function of Thickness in Long Fiber Reinforced Injection Molded Thermoplastics Vlastimil Kunc, Barbara Frame, Jeff Pryor, Ba Nghiep Nguyen, Charles L. Tucker Iii, Scott Case, Dayakar Penumadu, Eric W. Guffey
06/01/14 Tappi Journal Vol. 13, No. 6 Nanocellulose in Polymer Composites and Biomedical Applications Yuan Lu, Halil Levent Tekinalp, Claude Clifford Eberle, William Peter, Amit Kumar Naskar, Soydan Ozcan
06/05/14 Composites Part A: Applied Science and Manufacturing The Stiffness Tensor for Composites with Curved Discontinuous Fibers Vlastimil Kunc, Scott W. Case, Hector J. Santos-villalobos, Srdjan Simunovic
06/12/14 Proc. of SPIE Vol. 9105 910502-12 Infrared Imaging of the Polymer 3D-Printing Process Ralph B. Dinwiddie, Vlastimil Kunc, John M. Lindahl, Brian Post, Rachel J. Smith, Lonnie Love, Chad E. Duty
06/18/14 Advanced Materials 2014, 26, 5930-5935 3D Printing of Lightweight Cellular Composites Brett G. Compton And Jennifer A. Lewis
07/14/14 Industrial and Engineering Chemistry Research Engineered Interface Chemistry to Improve the Mechanical Properties of Carbon Fiber Composites Cured by Electron Beam F. Vautard, H. Grappe, S. Ozcan
07/27/14 Materials Science and Engineering: A Vol. 615 Properties of Inconel 625 Mesh Structures Grown by Electron Beam Additive Manufacturing F.A. List, R.R. Dehoff, L.e. Lowe, W.J. Sames
09/14/14 Cambridge Journal Vol. 29, No. 17 The Importance of Carbon Fiber to Polymer Additive Manufacturing Lonnie J. Love, Vlastamil Kunc, Orlando Rios, And Chad E. Duty, Amelia M. Elliott, Brian K. Post, And Rachel J. Smith, Craig A. Blue
09/14/14 Journal of Materials Research Volume 29 pp.1920-1930 Thermal Effects on Microstructural Heterogeneity of Inconel 718 Materials Fabricated by Electron Beam Melting William J. Sames, Kinga A. Unocic, Ryan R. Dehoff, Tapasvi Lolla, Sudarsanam S. Babu
09/30/14 Chemistry of Materials, 2014, 26 (21), pp 6272-6280 Unraveling the Voltage- Fade Mechanism in High-Energy Density Lithium-Ion Batteries- Origin of the Tetrahedral Cations for Spinel Conversion Debasish Mohanty, Jianlin Li, Daniel P. Abraham, Ashfia Huq, E. Andrew Payzant, David L. Wood, Iii, And Claus Daniel
09/03/14 Energy Technology Monolithic Composite Electrodes Comprising Silicon Nanoparticles Embedded in Lignin-Derived Carbon Fibers for Lithium-Ion Batteries Orlando Rios, Surendra K. Martha, Wyatt E. Tenhaeff, Michael A. McGuire, Jagjit Nanda, Claus Daniel
10/16/14 Composites Science and Technology Vol.105 Highly Oriented Carbon Fiber-Polymer Composites via Additive Manufacturing Halil L. Tekinlap, Vlastimil Kunc, Gregorio M. Velez-garcia, Chad E. Duty, Lonnie J. Love, Amit K. Naskar, Craig A. Blue, Soydan Ozcan
11/12/14 ACS Applied Materials and Interfaces, Volume 6, Issue 21, pages 19456-19464 Thermomagnetic Processing of Liquid-Crystalline Epoxy Resins and Their Mechanical Characterization Using Nanoindentation Li, Yuzhan, Orlando Rios, Michael Kessler
11/18/14 PHYSICAL REVIEW B Volume 90, Issue 17, Article number 174425 Symmetry-lowering lattice distortion at the spin reorientation in MnBi single crystals McGuire, Michael A., Huibo Cao, Bryan C. Chakoumakos, and Brian C. Sales
11/21/14 Elsevier Synthesis, spinning, and properties of very high molecular weight poly(acrylonitrile-co-methyl acrylate) for high performance precursors for carbon fiber E. Ashley Morris, Matthew C. Weisenberger, Stephanie B. Bradley , Mohamed G. Abdallah , Sue J. Mecham , Priya Pisipati , James E. Mcgrath
11/27/14 Scientific Reports Volume 4, Article number 7222 Theoretical Study on the role of Dynamics on the Unusual Magnetic Properties in MnBi K. V. Shanavas, David Parker & David J. Singh
12/12/14 SCIENTIFIC REPORTS, Volume 4, Article number 7024 Ferromagnetism of Fe3Sn and Alloys Sales, Brian C., Saparov, Bayrammurad, McGuire, Michael A
12/15/14 Journal of Luminescence, Volume 157, pages 69-73 Mn4+ emission in pyrochlore oxides Du, Mao-Hua
12/24/14 Chemical Reviews, Volume 114, Issue: 24, Pages: 1002-12023 Recovery of Uranium from Wet phosphoric Acid by Solvent Extraction Processes Beltrami, D., Cote, G., Mokhtari, H., Coutaud, B., Moyer, B.A.
03/01/15 Metallurgical and Materials Transactions A, 2015, Volume 46, Issue 3, pp., 1419-1432 Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering L. Kolbus, A. Payzant, P. Cornwell, T. Watkins, S. S. Babu, R. Dehoff, And C. Duty
03/01/15 Tech Beat Magazine 3D Printing Improved Structure and Property Control Ryan Dehoff
03/04/15 Journal of Power Sources Unconventional Irreversible Structural Changes in a High-Voltage Layered Li-Mn-Rich Oxide Debasish Mohanty, Athena S. Sefat , E. Andrew Payzant , Jianlin Li ,david L. Wood Iii , Claus Daniel
03/11/15 SAMPE Breaking Barriers in Polymer Additive Manufacturing L. Love, C. Duty, B. Post, R. Lind, P. Lloyd, V. Kunc, and C. Blue
03/12/15 Society of Plastics Engineers Improvement in Orientation Measurement for Short and Long Fiber Injection Molded Composites G.m. Velez-garcia, S. Mazahir, J. Hofmann, P. Wapperom, D. Baird, A. Zink-sharp, V. Kunc
03/25/15 The Bridge (NAE) Lithium-Ion Batteries and Their Manufacturing Challenges Claus Daniel
04/04/15 Physical Review B Volume 91, Issue 17, Article number 174401 Thermomagnetic Processing of Liquid-Crystalline Epoxy Resins and Their Mechanical Characterization Using Nanoindentation Parker, David S., Nirmal Ghimire, John Singleton, J. D. Thompson, Eric D. Bauer, Ryan Baumbach, David Mandrus, Ling Li, and David J. Singh
04/10/15 Macromolecules, 2015, 48 (9), pp 2864–2874 Controlled Shape Memory Behavior of a Smectic Main-Chain Liquid Crystalline Elastomer Yuzhan Li, Cole Pruitt, Orlando Rios, Liqing Wei∥, Mitch Rock, Jong K. Keum, Armando G. Mcdonald, And Michael R. Kessler
04/15/15 Proceedings of the 2012 Industrial and Systems Engineering Research Conference Volume 3, number 2015-4, pages 101-106 Modeling the Value Recovery of Rare Earth Permanent Magnets at End-of-Life Liang Conga, Hongyue Jinb, Pete Fitsosc, Timothy McIntyred, Yuehwern Yihb, Fu Zhaoa, e, John W. Sutherlande
04/15/15 ACS Catalysis, Volume 5, Issue 4, Pages 2051-2061 Selective Hydrogenation of Phenol Catalyzed by Palladium on High-Surface-Area Ceria at Room Temperature and Ambient Pressure Nelson, N.C., Manzano, J.S., Sadow, A.D., Overbury, S.H., Sowing, I.I
04/24/15 Journal of Cleaner Production Energy and Emissions Saving Potential of Additive Manufacturing- the Case of Lightweight Aircraft Components Runze Huang, Matthew Riddle, Diane Graziano, Joshua Warren, Sujit Das, Sachin Nimbalkar, Joe Cresko, Erick Masanet
05/01/15 Materials Science and Technology,  Vol. 31 No. 8 Guest Editorial- Additive Manufacturing Suresh Babu, Ruth Goodridge
05/01/15 Materials Science and Technology  VOL 31 NO 8 Site specific control of crystallographic grain orientation through electron beam additive manufacturing R. R. Dehof, M. M. Kirka, W. J. Sames, H. Bilheux, A. S. Tremsin, L. E. Lowe And S. S. Babu
05/06/15 Physical Review B Volume 91, Issue 18, Article number 184401 Out-of-plane spin-orientation dependent magnetotransport properties in the anisotropic helimagnet Bornstein, Alexander ;Chapman, Benjamin Ghimire, N J; Mandrus, D.; Parker, David S. ;Lee, Minyhea
05/16/15 Science and Technology of Welding and Joining Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V A. W. Prabhu, T. Vincent, A. Chaudhary, W. Zhang And S. S. Babu
05/26/15 Nanotoday Green Nanomaterials- On Track for a Sustainable Future Y. Lu And S. Ozcan
06/01/15 Materials Science and Technology, Vol. 31, Issue 8 Crystallographic Texture Engineering Through Novel Melt Strategies via Electron Beam Melting- Inconel 718 R.R. Dehoff, M.M. Kirka, F.A. List Iii, K.A. Unocic, W.J. Sames
06/01/15 Carbohydrate Polymers Improved Mechanical Properties of Polylactide Nanocomposites-Reinforced with Cellulose Nanofibrils through Interfacial Engineering via Amine-Functionalization Y. Lu, Mc. Cueva, E. Lara-curzio, S. Ozcan
06/25/15 Science and Technology of Welding and Joining Characterisation of Al–Ti dissimilar material joints fabricated using ultrasonic additive manufacturing P. J. Wolcott; N. Sridharan; S. S. Babu; A. Miriyev; N. Frage; M. J. Dapino
07/01/15 Additive Manufacturing Volume 7 Pages 83–91 Computational modeling of residual stress formation during the electron beam melting process for Inconel 718 P. Prabhakar, W. J. Sames, R Smith, R. Dehoff, And S. S. Babu
07/15/15 ECS Journal of Solid State Science and Technology, Volume: 5, Issue: 1, Pages: R3007-R3018 Using DFT Methods to Study Activators in Optical Materials Mao-Hua Du
08/01/15 SAMPE Journal Volume 51, No. 4 Numerical Simulation of Big Area Additive Manufacturing (3D Printing) of a Full Size Car V. Kunc , B. Compton, S. Simunovic, C. Duty, L. Love, B. Post, C. Blue
08/01/15 Science and Technology of Welding and Joining Effect of filler metal and post-weld friction stir processing on stress corrosion cracking susceptibility of Al–Zn–Mg arc welds T. E. Borchers; A. Seid; S. S. Babu; P. Shafer; W. Zhang
08/15/15 Journal of Magnetism and Magnetic Materials 401, 525 A study of the physical properties of single crystalline Fe5PB2 Tej Lamichhane, Srinivasa Thimmaiah, D. S. Parker, Sergey L. Bud'ko
09/14/15 SAMPE Journal Volume 51, No. 4 Numerical Simulation of Big Area Additive Manufacturing (3D Printing) of a Full Size Car F. Talagani, S. DorMohammadi, R. Dutton, C. Godines, H. Baid, F. Abdi, V. Kunc, B. Compton, S. Simunovic, C. Duty, L. Love, B. Post, C. Blue
09/15/15 European Journal of Inorganic Chemistry, Issue 26, Pages 4354-4561 Dissolution of the Rare Earth Mineral Bastnaesite by Acidic Amide Ionic Liquid for Recovery of Critical Materials Use Freiderick, J.W. Stankovich, J.J., Luo, H
09/21/15 Metallurgical and Materials Transactions B Investigation and Analytical Description of Acoustic Production by Magneto-Acoustic Mixing Technology Hunter B. Henderson, Orlando Rios, Gerard M. Ludtka, And Michele V. Manuel
09/21/15 Metallurgical and Materials Transactions B Investigation and Analytical Description of Acoustic Production by Magneto-Acoustic Mixing Technology Hunter Bryant Henderson, Orlando Rios, Gerard Michael Ludtka, Michele Manuel
09/23/15 Journal of Electronic Materials, Vol. 45, No. 3, 2016 Development of Thermoelectric Fibers for Miniature Thermoelectric Devices Fei Ren,Hsin Wang, Paul A. Menchhofer and James O. Kiggans
09/25/15 Physical Review B, Volume 92, Issue 10, Article number 104429 Itinerant antiferromagnetism in FeMnP0.8Si0.2 single crystals B.C. Sales, M. A. Susner, B. S. Conner, J. Q. Yan, A. F. May
09/28/15 Journal of Applied Physics 118, Issue 12, 1239032 Electronic and magnetic properties of Si substituted Fe3Ge K. V. Shanavas, Michael A. McGuire and David S. Parker
10/01/15 Mechanical Engineering 3-D Footprint Grows Love, Lonnie
10/20/15 Metallurgical and Materials Transactions B Recyclability Study on Inconel 718 and Ti-6Al-4V Powders for Use in Electron Beam Melting Peeyush Nandwana, William H. Peter, Ryan R. Dehoff, Larry E. Lowe,michael M. Kirka, Francisco Medina, And Sudarsanam S. Babu
10/21/15 Journal of Power Sources Heat Transfer Enhancement in a Lithium-Ion Cell Through Improved Material-Level Thermal Transport Vivek Vishwakarma, Chirag Waghela, Zi Wei, Ravi Prasher, Shrikant C. Nagpure, Jianlin Li, Fuqiang, Claus Daniel, Ankur Jain
10/25/15 International Journal of Machine Tools and Manufacture Residual Stresses in Additively Manufactured Inconel 718 Engine Mount Watkins, Thomas R.; Cornwell, Paris A.; Dehoff, Ryan R.; Nangia, Vinod; Godfrey, Donald G.
10/28/15 Journal of Applied Physics 118, Issue 16, 163902 Magnetic and structural properties of ferromagnetic Fe5PB2 and FeSiB2 and effects of Co and Mn substitutions Michael A. McGuire, and David S. Parker
10/29/15 RSC Advances Self-Assembled Asymmetric Membrane Containing Micron-Sized Germanium for High Capacity Lithium-Ion Batteries Ian Byrd, Hao Chen, Theron Webber, Tiffany Roy, Jianlin Li, Ji Wu
11/15/15 American Chemical Society, Volume 5, Issue 11, pages 6426-6435 Role of CO2 as a Soft oxidant for Dehydrogenation of Ethylbenzene to Stryene over a High-Surface Area Ceria Catalyst Li Zhang,† Zili Wu,†,‡ Nicholas C. Nelson,∥,§ Aaron D. Sadow,∥,§ Igor I. Slowing,∥,§ and Steven H. Overbury
11/19/15 The American Society of Mechanical Engineers Assessment of Dimensional Integrity and Spatial Defect Localization in Additive Manufacturing Using Spectral Graph Theory Prahalad K. Rao, Zhenyu Kong, Chad E. Duty, Rachel J. Smith, Vlastimil Kunc, Lonnie J. Love
11/20/15 Metallurgical and Materials Transactions A Mechanical Characterization of an Additively Manufactured Inconel 718 Theta-Shaped Specimen Ercan Cakmak , Thomas R. Watkins, Jeffrey R. Bunn, Ryan C. Cooper, Paris A. Cornwell, Yanli Wang, Lindsay M. Sochalski-kolbus, Ryan R. Dehoff, Sudarsanam S. Babu
12/01/15 MRS Bulletin Vol.40 Additive manufacturing of materials-Opportunities and challenges S.s. Babu, L. Love, R. Dehoff, W. Peter, T.r. Watkins, And S. Pannala
01/01/16 MRS Advances Evaluation of Residual Moisture in Lithium-Ion Battery Electrodes and its Effect on Electrode Performance Jianlin Lia, Claus Daniela, Seong Jin Ana and David Wood
01/06/16 Metallurgical and Materials Transactions B Sintering Kinetics of Inkjet Printed Conductive Silver Lines on Insulating Plastic Substrate Wenchao Zhou, Frederick A. List, Chad E. Duty And S.s. Babu
01/06/16 Rapid Prototyping Journal Fabrication of Conductive Paths on a Fused Deposition Modeling Substrate using Inkjet Deposition Zhou, Wench, List Iii, Frederick Alyious, Duty, Chad E., Babu, Sudarsanam Suresh
01/06/16 Metallurgical and Materials Transactions B Sintering Kinetics of Inkjet Printed Conductive Silver Lines on Insulating Plastic Substrate Wenchao Zhou, Fred List, Chad Duty, Suresh Babu
01/27/16 MRS Energy and Sustainability Understanding the Structure and Structural Degradation Mechanisms in High-Voltage Lithium-Ion Battery Cathode Oxides- A Review of Materials Diagnostics Debasish Mohanty, Jianlin Li, ShrikantC. Nagpure, David L. Wood III, Claus Daniel
02/09/16 Journal of Minerals, Metals and Minerals Society Texture Evolution During Laser Direct Metal Deposition of Ti-6Al-4V Niyanth Sridharan, Anil Chaudhary, Peeyush Nandwana, Sudarsanam S. Babu
02/17/16 TMS 2016 Annual Meeting and Exhibition Electromagnetic Thermal Management and Structure Control in High Throughput Large Area Additive Manufacturing William Carter, Vlastimil Kunc, Randall Lind, Lonnie Love, Brian Post, Orlando Rios
03/01/16 American Journal of Engineering and Applied Sciences Infiltration of Nanoparticles into Porous Binder Jet Printed Parts AM Elliott, S. Alsalihi, A.L. Merriman, M.M. Basti
03/02/16 Additive Manufacturing Effects of the Microstructure and Porosity on Properties of Ti-6Al-4V Alloy Fabricated by Electron Beam Melting (EBM) Haize Galarraga, Diana Lados, Ryan Dehoff, Michael Kirka, Peeyush Nandwana
03/03/16 Journal of the Minerals, Metals & Materials Society Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties Michael Kirka, Kinga Unocic, Narendran Raghavan, Frank Medina, Ryan Dehoff, Suresh Babu
03/04/16 Journal of Power Sources Effect of Electrode Manufacturing Defects on Electromechanical Performance in Lithium-Ion Batteries & Cognizance of the Battery Failure Sources Debasish Mohanty, Edward E. Hockaday, Jianlin Li, Dale K. Hensley, Claus Daniel, David L. Wood III
03/07/16 International Materials Reviews The metallurgy and processing science of metal additive manufacturing W. J. Sames, F. A. List, S. Pannala, R. R. Dehoff & S. S. Babu
03/31/16 Advances in Materials Research Vo.l.4, No. 4 Strategic coating of NdFeb magnets with Dy to improve the coercivity and energy product of permanent magnets Paranthaman, Mariappan
04/01/16 Carbon The State of Understanding of the Lithium-Ion-Battery Graphite Solid Electrolyte Interphase (SEI) and its Relationship to Formation Cycling Seong Jin An, Jianlin Li, Claus Daniel, Debasish Mohanty, Shrikant Nagpure, David L. Wood, III
04/02/16 Acta Materialia Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting Ercan Cakmak, Michael M. Kirka, Thomas R. Watkins, Ryan C. Coope, Ke An, Hahn Choo, Wei Wu, Ryan R. Dehoff, Sudarsanam S. Babu
04/05/16 SAE Technical Paper Big Area Additive Manufacturing and Hardware-in-the-Loop for Rapid Vehicle Powertrain Prototyping, A Case Study on the Development of a 3-D Printed Shelby Cobra Curran, S., Chambon, P., Lind, R., Love, L.
05/23/16 Journal of Materials Cerium-Based, Intermetallic-Strengthened Aluminum Casting Alloy. High-Volume Co-product Development Zachary C. Sims, D. Weiss, S. K. McCall, M. A. McGuire, R. T. Ott, Tom Geer, Orlando Rios , P. A. E. Turchi
06/01/16 Applied Materials & Interfaces Photo-responsive Liquid Crystalline Epoxy Networks with Shape Memory Behavior and Dynamic Ester Bonds Yuzhan Li, Orlando Rios, Jong K. Keum, Jihua Chen, and Michael R Kessler
08/18/15 Environmental Science & Technology, Volume 49, Number 16 Critical Materials Recovery from Solutions and Wastes-Retrospective and Outlook Diallo, Mamadou S. Baier, Gretchen Moyer, Bruce A., Hamelers, Bert