Recent News & Features

News Releases Archive | Features Archive

 

Staff

Bruce A. Pint

Group Leader
Corrosion Science & Technology Group
Materials Science & Technology Division
Oak Ridge National Laboratory
P.O. Box 2008
Oak Ridge, TN 37831-6116
Phone: (865) 576-2897
Fax: (865) 241-0215
email: pintba@ornl.gov

 

Research Interest:

Research, development and characterization of corrosion-resistant, high-temperature materials for power generation applications.

Education:

  • Ph.D., Ceramics, Materials Science and Engineering Department, Massachusetts Institute of Technology, 1992
  • S.B., Materials Science and Engineering, Massachusetts Institute of Technology, 1988

Experience:

  • January 1997- present - Research Staff, Corrosion Science & Technology Group, Metals & Ceramics Division, Oak Ridge National Laboratory
  • February 1994 - January 1997 - Department of Energy Distinguished Postdoctoral Research Program, Oak Ridge National Laboratory
  • June 1992 - January 1994 - Post-doctoral research, Massachusetts Institute of Technology
  • September 1989 - December 1990 - Teaching assistant for undergraduate materials laboratory, Massachusetts Institute of Technology
  • Summer 1986 and 1987, January 1988 - The Timken Company Canton, OH

Professional Societies:

  • American Society for Metals (ASM) International
  • The Electrochemical Society
  • Materials Research Society
  • American Ceramic Society
  • American Society for Testing of Materials

Publications:

  1. Y. Yamamoto, M. P. Brady, Z. P. Lu, C. T. Liu, M. Takeyama, P. J. Maziasz and B. A. Pint, (2007) “Alumina-Forming Austenitic Stainless Steels Strengthened by LAves Phase and MC Carbide Precipitates,” Metallurgical  and Materials Transactions., v. 38A, p. 2737-2746.
  2. B. A. Pint, S. J. Pawel, M. Howell, J. L. Moser, G. W. Garner, M. L. Santella, P. F. Tortorelli, F. W. Wiffen and J. R. DiStefano, “Initial Characterization of V-4Cr-4Ti and MHD Coatings Exposed to Flowing Li,” Journal of  Nuclear Materials .
  3. B. A. Pint, P. J. Maziasz, J. Schauer and V. Levin, (2008) “Protective Aluminide Coatings for NiCr Alloys in Combustion Environments,” NACE Paper 08-443, Houston, TX, presented at NACE Corrosion 2008, New Orleans, LA, March 2008.
  4. B. A. Pint, “Overview of Coating and Compatibility Research For Fusion Energy in the United States,” Materials Science Forum.
  5. B. A. Pint, W. D. Porter and I. G. Wright, “The Effect of Thermal Expansion on Spallation Behavior of Fe-Base Alumina-Forming Alloys,” Materials Science Forum.
  6. Y. Zhang, B. A. Pint, K. M. Cooley and J. A. Haynes, “Formation of Aluminide Coatings on Fe­based Alloys by Chemical Vapor Deposition,”Surface and Coatings Technology.
  7. B. A. Pint and K. L. More, (2008) “Transformation of Al2O3 to LiAlO2 in Pb-17Li at 800°C,” Journal of  Nuclear Materials,.
  8. B. A. Pint, Y. Zhang, S. Dryepondt, L. R. Walker and I. G. Wright, (2007) "Long-Term Performance of Aluminide Coatings on Fe-Base Alloys," Proc. Thirteenth Annual Conf. Fossil Energy Materials, R. R. Judkins (comp.) U. S. Department of Energy.
  9. M. P. Brady, Y. Yamamoto, M.L. Santella, and B.A. Pint, (2007) “Effects of Minor Alloy Additions and Oxidation Temperature on Protective Alumina Scale Formation in Creep-Resistant Austenitic Stainless Steels,” Scripta Materialia, v. 57, p. 1117-20.
  10. B. A. Pint, (2008) “Design Strategies for New Oxidation-Resistant High Temperature Alloys,” in W. Gao (ed.), “New Development in High Temperature Corrosion and Protection of Materials,” Woodhead, Cambridge, UK,.
  11. J. P. Stacy, Y. Zhang, B. A. Pint, J. A. Haynes, B. T. Hazel and B. A. Nagaraj, (2007), “Synthesis and Oxidation Performance of Al-Enriched g+g’ Coatings on Ni-Based Superalloys Via Secondary Aluminizing,” Surface and Coatings Technology, v. 202, p. 632-636.
  12. J. A. Haynes, B. A. Pint, Y. Zhang and I. G. Wright, (2007), “Comparison of the Cyclic Oxidation Behavior of b-NiAl, b-NiPtAl and g+g’ NiPtAl Coatings on Various Superalloys,” Surface and Coatings Technology, v. 202, p. 730-734.
  13. B. A. Pint, Y. Zhang, L. R. Walker and I. G. Wright, (2007) “Long-Term Performance of Aluminide Coatings on Fe-Base Alloys,” Surface and Coatings Technology, v. 202, p. 637-642.
  14. S. Dryepondt and B. A. Pint, (2008) “Effect of Substrate Mechanical Properties on Alumina Scale Morphology,” Materials Science and Engineering.
  15. Y. Yamamoto, M. P. Brady, Z. P. Lu, P. J. Maziasz, C. T. Liu, B. A. Pint, K. L. More, H. M. Meyer and E. A. Payzant, (2007) “Creep-Resistant, Al2O3-Forming Austenitic Stainless Steels,” Science, v. 316, p. 433-436.
  16. B. A. Pint, (2007) “Compatibility Issues For a High Temperature Dual Coolant Blanket,” Fusion Science and Technology, v. 52, p. 829-833.
  17. Y. Zhang, Y. Q. Wang and B. A. Pint, (2007) “Evaluation of Iron Aluminide Coatings for Oxidation Protection in Water Vapor Environment,” NACE Paper 07-468, Houston, TX, presented at NACE Corrosion 2007, Nashville, TN, March 2007.
  18. S. Dryepondt, Y. Zhang and B. A. Pint, (2007) “Creep and Corrosion Testing of Aluminide Coatings on Martensitic Substrates,” NACE Paper 07-471, Houston, TX, presented at NACE Corrosion 2007, Nashville, TN, March 2007.
  19. B. A. Pint, J. P. Shingledecker, M. P. Brady and P. J. Maziasz, (2007) “Alumina-Forming Austenitic Alloys for Advanced Recuperators,” ASME Paper #GT2007-27916, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Montreal, Canada, May 14-17, 2007.
  20. B. A. Pint and L. D. Paul (2007) “Oxidation Behavior of Welded and Base Metal UNS N06025,” NACE Paper 07-470, Houston, TX, presented at NACE Corrosion 2007, Nashville, TN, March 2007.
  21. B. A. Pint, K. L. More and I. G. Wright, “The Oxidation Behavior of Low Al Ni-Pt-Al Cast Alloys,” Oxidation of Metals.
  22. B. A. Pint, M. J. Dwyer and R. M. Deacon, (2008) “Internal Oxidation-Nitridation of Ferritic Fe(Al) Alloys in Air,” Oxidation of Metals.
  23. B. A. Pint, Y. Zhang, J. A. Haynes and I. G. Wright, (2006) "Extended Alloy Lifetimes Through Improved Coating Performance and Reactive Element Optimization," Proc. Twentieth Annual Conf. Fossil Energy Materials, R. R. Judkins (comp.) U. S. Department of Energy.
  24. E. E. Bloom, J. T. Busby, C. E. Duty, P. J. Maziasz, T. E. McGreevy, B. E. Nelson, B. A. Pint, P. F. Tortorelli, and S. J. Zinkle, (2007) “Critical Questions in Materials Science and Engineering for Successful Development of Fusion Power,” Journal of Nuclear Materials, v. 367-370, p. 1-10.
  25. P. J. Maziasz, B. A. Pint, J. P. Shingledecker, N. D. Evans, Y. Yamamoto, K. L. More and E. Lara­Curzio, (2007) “Advanced Alloys for Compact, High-Efficiency, High-Temperature Heat-Exchangers,” International Journal of Hydrogen Energy, v. 32, p. 3622 3630.
  26. J. R. Keiser, R. DeCarrera, D. G. Newport, R. S. Rowbottom and B. A. Pint, (2006) “Materials Issues in Black Liquor Steam Reforming/Gasification,” TAPPI Journal v. 5(2), p. 29.
  27. B. A. Pint, (2006) "Stainless Steels with Improved Oxidation Resistance for Recuperators,” Journal of Engineering for Gas Turbines and Power, v. 128, p. 370-376.
  28. Y. Zhang, D. A. Ballard, J. P. Stacy, B. A. Pint and J. A. Haynes, (2006) “Synthesis and Oxidation Behavior of Platinum-Enriched g+g’ Bond Coatings on Ni-Base Superalloys,” Surface and Coatings Technology. v. 201, p. 3857-3861.
  29. S. Dryepondt, Y. Zhang and B. A. Pint, (2006) “Creep and Corrosion Testing of Aluminide Coatings on Ferritic Substrates,” Surface and Coatings Technology. v. 201, p. 3880-3884.
  30. B. A. Pint, J. A. Haynes, Y. Zhang, K. L. More and I. G. Wright, (2006) “The Effect of Water Vapor on the Oxidation Behavior of Ni-Pt-Al Coatings and Alloys,” Surface and Coatings Technology. v. 201, p. 3852-3856.
  31. A. F. Jankowski, C. K. Saw, J. L. Ferreira, J. S. Harper, J. P. Hayes and B. A. Pint, “Morphology, Microstructure and Residual Stress in EB-PVD Erbia Coatings,” Journal of Materials Science, v. 42, p. 5722-5727.
  32. J. R. Keiser, J. G. Hemrick, R. DeCarrera, D. G. Newport, P. F. Tortorelli, B. A. Pint and T. A. Middleton, (2006) “Materials Issues in Steam Reforming/Gasifying of Black Liquor,” NACE Paper 06-239, Houston, TX, presented at NACE Corrosion 2006, San Diego, CA, March 2006.
  33. T. Muroga, J. M. Chen, V. M. Chernov, K. Fukumoto, D. T. Hoelzer, R. J. Kurtz, T. Nagasaka, B. A. Pint, M. Satou, A. Suzuki and H. Watanabe, (2007) “Advances in Development of Vanadium Alloys and MHD Insulator Coatings,” Journal of Nuclear Materials, v. 367-370, p. 780-787.
  34. B. A. Pint, J. L. Moser, A. Jankowski and J. Hayes, (2007) “Compatibility of Multi-Layer, Electrically Insulating Coatings For the Vanadium-Lithium Blanket,” Journal of Nuclear Materials, v. 367-370, p. 1165-1169.
  35. B. A. Pint J. L. Moser and P. F. Tortorelli, (2007) “Investigation of Pb-Li Compatibility Issues for the Dual Coolant Blanket Concept,” Journal of Nuclear Materials, v. 367-370, p. 1150-1154.
  36. M. P. Brady, B. A. Pint, Z. G. Lu, J. H. Zhu, C. E. Milliken, E. D. Kreidler, L. Miller, T. R. Armstrong and L. R. Walker, (2006) “Comparison of Oxidation Behavior and Electrical Properties of Doped NiO- and Cr2O3-Forming Alloys for Solid Oxide Fuel Cell Metallic Interconnects,” Oxidation of Metals, v. 65, p. 237-61.
  37. B. A. Pint, K. L. More, R. Trejo and E. Lara-Curzio, (2006) “Comparison of Recuperator Alloy Degradation in Laboratory and Engine Testing,” ASME Paper #GT2006-90194, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Barcelona, Spain, May 8-11, 2006.
  38.  B. A. Pint and J. R. Keiser, (2006) “Alloy Selection for High Temperature Heat Exchangers,” NACE Paper 06-469, Houston, TX, presented at NACE Corrosion 2006, San Diego, CA, March 2006.
  39. Y. Zhang, A. P. Liu and B. A. Pint, (2007) “Interdiffusion Behavior of Aluminide Coatings on Fe­Base Alloys,” Materials and Corrosion. v. 58, p. 751-761.
  40. B. A Pint, S. A. Speakman, C. J. Rawn and Y. Zhang, (2006) “Deformation and Phase Transformations During Cyclic Oxidation of Ni-Al and Ni-Pt-Al –Relevance to Platinum Aluminide Coating Performance,” Journal of Metals, v .58(1), p. 47-52.
  41. B. A. Pint, Y. Zhang, J. A. Haynes and I. G. Wright, (2005) "Extended Alloy Lifetimes Through Improved Coating Performance and Reactive Element Optimization," Proc. Nineteenth Annual Conf. Fossil Energy Materials, R. R. Judkins (comp.) U. S. Department of Energy.
  42. B. A. Pint J. L. Moser and P. F. Tortorelli, (2006) "Liquid Metal Compatibility Issues for Test Blanket Modules,” Fusion Engineering and Design  v. 81, p. 901-908.
  43. D. J. Young and B. A. Pint, (2006) “Chromium Volatilization Rates from Cr2O3 Scales Into Flowing Gases Containing Water Vapor,” Oxidation of Metals, v. 66, p. 137-153.
  44. Y. Zhang, B. A. Pint, K. M. Cooley and J. A. Haynes, (2005) "The Effect of Nitrogen on the Formation and Oxidation Behavior of Iron Aluminide Coatings Fabricated by Chemical Vapor Deposition," Surface and Coatings Technology, v. 200, p. 1231-1235.
  45. Y. Zhang, B. A. Pint, J. A. Haynes and I. G. Wright, (2005) "A Platinum-Enriched g+g’ Two-Phase Bond Coat on Ni-Base Superalloys,"  Surface and Coatings Technology, v. 200, p. 1259-1263.
  46. I. G. Wright and B. A. Pint, (2005) “Bond Coating Issues in Thermal Barrier Coatings for Industrial Gas Turbines,” Journal of Power and Energy, Proc. IMechE v. 219 Part A, p. 101­7.
  47. B. A. Pint, G. W. Garner and L. R. Walker, “Long-term behavior of austenitic stainless steels in air with water vapor” Journal of Materials Science.
  48. E. Lara-Curzio, R. Trejo, K. L. More, P. J. Maziasz and B. A. Pint, (2005) “Evaluation and Characterization of Iron- and Nickel-Based Alloys for Microturbine Recuperators,” ASME Paper #GT2005-68630, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Reno-Tahoe, NV, June 6-9, 2005.
  49. P. J. Maziasz, J. P. Shingledecker, B. A. Pint, N. D. Evans, Y. Yamamoto, K. L. More, and E. Lara­Curzio, (2006) “Overview of Creep Strength and Oxidation of Heat-Resistant Alloy Sheets and Foils for Compact Heat-Exchangers,” Journal of Turbomachinery—Transactions of the ASME, v.128(4), p.814-819 and ASME Paper #GT2005-68927, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Reno-Tahoe, NV, June 6-9, 2005.
  50. B. A. Pint and J. H. Schneibel, (2005) “The Effect of Carbon and Reactive Element Dopants on Oxidation Lifetime of FeAl,” Scripta Materialia, v.52(12), p.1199-1204  &  v. 53, p. 379.
  51. B. A. Pint, (2005) “The Effect of Water Vapor on Cr Depletion in Advanced Recuperator Alloys,” ASME Paper #GT2005-68495, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Reno-Tahoe, NV, June 6-9, 2005.
  52. E. Lara-Curzio, R. Trejo, K. L. More, P. J. Maziasz and B. A. Pint, (2004) “Screening and Evaluation of Materials for Microturbine Recuperators,” ASME Paper #GT2004-54254 presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Vienna, Austria, June 14-17, 2004.
  53. B. A. Pint and P. F. Tortorelli, (2005) “Environmental Resistance in the Mars Atmosphere.” in Proceedings of Space Technology and Applications International Forum (STAIF 2005), edited by M. El-Genk, AIP Conference Proceedings Vol.746, Melville, New York, p. 279-284.
  54. B. A. Pint and P. J Maziasz, (2005) “Development of High Creep Strength and Corrosion­Resistant Stainless Steels,” NACE Paper 05-449, Houston, TX, presented at NACE Corrosion 2005, Houston, TX, April 2005.
  55. I. G. Wright, B. A. Pint, Y. Zhang, R. A. Bishop, J. C. Farmer, A. Jankowski, and R. B. Rebak, (2004) “Preliminary high-temperature oxidation data in steam-CO2,” NACE Paper 04­531, Houston, TX, presented at NACE Corrosion 2004, New Orleans, LA, March 2004.
  56. B. A. Pint, K. L. More, H. M. Meyer and J. R. DiStefano, (2005) “Recent Progress Addressing Compatibility Issues Relevant to Fusion Environments,” Fusion Science and Technology, v. 47, p. 851-55.
  57. B. A. Pint, Y. Zhang, J. A. Haynes and I. G. Wright, (2004) "High Temperature Oxidation Performance of Aluminide Coatings," Proc. Eighteenth Annual Conf. Fossil Energy Materials, R. R. Judkins (comp.) U. S. Department of Energy.
  58. P. J. Maziasz, B. A. Pint, J. P. Shingledecker, K. L. More, N. D. Evans and E. Lara-Curzio, (2004) “Austenitic Stainless Steels and Alloys with Improved High-Temperature Performance for Advanced Microturbine Recuperators,” ASME Paper #GT2004-54239, presented at International Gas Turbine & Aeroengine Congress & Exhibition, Vienna, Austria, June 14-17, 2004.
  59. B. A. Pint and R. M. Deacon, (2005) “Comment on ‘Oxidation of Alloys Containing Aluminum and Diffusion in Al2O3’[J. Appl. Phys., 95, 3217, 2004],” Journal of Applied Physics, v. 97(11) Art. No. 116111.
  60. P. F. Tortorelli, J. H. Schneibel, K. L. More and B. A. Pint, (2004) “Oxidation-Sulfidation Behavior of Multiphase Mo-Si-B Alloys,” Materials Science Forum, v. 461-4, p. 1063-70.
  61. J. A. Haynes, Y. Zhang, K. S. Reeves, K. M. Cooley and B. A. Pint, (2004) "High-Temperature Diffusion Barriers for Protective Coatings," Surface and Coatings Technology, v. 188-189, p. 153-157.
  62. Y. Zhang, B. A. Pint, G. W. Garner, K. M. Cooley and J. A. Haynes, (2004) "Effect of Cycle Length on the Oxidation Performance of Iron Aluminide Coatings," Surface and Coatings Technology, v. 188-189, p. 35-40.
  63. B. A. Pint, J. R. DiStefano and I. G. Wright, (2006) "Oxidation Resistance:  One Barrier to Moving Beyond Ni-Base Superalloys,"Materials  Science and Engineering. v. A415, p. 255-263.
  64. B. A. Pint, J. A. Haynes, K. L. More and I. G. Wright, (2004) "The Use of Model Alloys to Understand and Improve the Performance of Pt-modified Aluminide Coatings," in K. A. Green, et al. eds., Superalloys 2004, TMS, Warrendale, PA, p.597-606.
  65. "The Role of Chemical Composition on the Oxidation Performance of Aluminide Coatings," Surface Coatings and Technology, v.188-189, p.71-78 (2004).
  66. I. G. Wright, R. Peraldi and B. A. Pint, (2004) "Influence of Aluminum Depletion Effects on the Calculation of the Oxidation Lifetimes of FeCrAl Alloys," Materials Science Forum, v. 461­4, p. 579-90.
  67. B. A. Pint and I. G. Wright, (2005) "Oxidation Behavior of ODS Fe-Cr Alloys," Oxidation of Metals, v. 3, p. 193-213.
  68. P. F. Tortorelli, K. L. More, E. D. Specht, B. A. Pint and P. Zscack, (2003) "Growth Stress - Microstructural Relationships for Alumina Scales," Materials at High Temperature, v. 20, p. 303-10.
  69. B. A. Pint, P. F. Tortorelli, A. Jankowski, J. Hayes, T. Muroga, A. Suzuki, O.I. Yeliseyeva and V. M. Chernov, (2004) "Recent Progress in the Development of Electrically Insulating Coatings for a Liquid Lithium Blanket," Journal of Nuclear Materials, v. 329-333, p. 119-24.
  70. B. A. Pint, L. D. Chitwood and J. R. DiStefano, (2004) "Compatibility of CVD SiC with Pb-Li at 800°-1100°C," Proc. IEA workshop on SiC, June 2004, Boston, MA.
  71. B. A. Pint and I. G. Wright, (2004) "The Oxidation Behavior of Fe-Al Alloys," Materials Science Forum, v. 461-4, p. 799-806.
  72. B. A. Pint, R. Peraldi and P. J. Maziasz, (2004) "The Use of Model Alloys to Develop Corrosion­Resistant Stainless Steels," Materials Science Forum., v. 461-4, p. 815-822.
  73. B. A. Pint and K. L. More, (2004) "Stainless Steels with Improved Oxidation Resistance for Recuperators,” ASME Paper #GT2004-53627, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Vienna, Austria, June 14-17, 2004.
  74. B. A. Pint, (2004) “The Long-Term Performance of Model Austenitic Alloys in Humid Air,” NACE Paper 04-530, Houston, TX, presented at NACE Corrosion 2004, New Orleans, LA, March 2004.
  75. B. A. Pint and J. R. DiStefano, (2005) "The Role of Oxygen Uptake and Scale Formation on the Embrittlement of Vanadium Alloys," Oxidation of Metals, v. 63, p. 33-55.
  76. B. A. Pint, Y. Zhang, J. A. Haynes and I. G. Wright, (2003) "High Temperature Oxidation Performance of Aluminide Coatings," Proc. Seventeenth Annual Conf. Fossil Energy Materials, R. R. Judkins (comp.) U. S. Department of Energy.
  77. P. J. Maziasz, R. W. Swindeman, J. P. Shingledecker, K. L. More, B. A. Pint, E. Lara-Curzio and N. D. Evans, (2003) "Improving High-Temperature Performance of Austenitic Stainless Steels for Advanced Microturbine Recuperators," in Parsons 2003, Engineering Issues in Turbine Machinery, Power Plant and Renewables, Maney, London, pp. 1057-73.
  78. E. Lara-Curzio, P. J. Maziasz, B. A. Pint, M. Stewart, D. Hamrin, N. Lipovich and D. DeMore, "Test Facility for Screening and Evaluating Candidate Materials for Advanced Microturbine Recuperators," ASME Paper #2002-GT-30581, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Amsterdam, Netherlands, June 3­6, 2002.
  79. Y. Zhang, J. A. Haynes, B. A. Pint, I. G. Wright, and W. Y. Lee, (2003) "Martensitic Transformation in CVD NiAl and (Ni,Pt)Al bond coatings," Surface and Coatings Technology, v. 163-164, p. 19-24.
  80. P. J. Maziasz, B. A. Pint, R. W. Swindeman, K. L. More and E. Lara-Curzio, (2003) “Selection, Development and Testing of Stainless Steels and Alloys for High-Temperature Recuperator Applications,” ASME Paper #GT2003-38762, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Atlanta, GA, June 2-5, 2003.
  81. B. A. Baker, G. D. Smith, B. A. Pint and L. R. Walker, (2003) "High-Temperature Oxidation Behavior of a New Ni-Cr-Mo-Si Alloy," NACE Paper 03-476, Houston, TX, presented at NACE Corrosion 2003, San Diego, CA, March 2003.
  82. J. A. Haynes, B. A. Pint, K. L. More, Y. Zhang, and I. G. Wright, (2002) "Influence of Sulfur, Platinum and Hafnium on the Oxidation Behavior of CVD NiAl Bond Coatings," Oxidation of Metals , v. 58, p. 513-544.
  83. B. A. Pint, J. R. DiStefano and P. F. Tortorelli, (2003) "High Temperature Compatibility Issues for Fusion Reactor Structural Materials," Fusion Science and Technology, v. 44, p. 433-40.
  84. B. A. Pint and R. Peraldi, (2003) “Factors Affecting Corrosion Resistance of Recuperator Alloys,” ASME Paper #GT2003-38692, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Atlanta, GA, June 2-5, 2003.
  85. B. A. Pint, R. Peraldi and P. F. Tortorelli, (2003) “The Effect of Alloy Composition on the Performance of Stainless Steels in Exhaust Gas Environments,” NACE Paper 03-499, Houston, TX, presented at NACE Corrosion 2003, San Diego, CA, March 2003.
  86. B. A. Pint and L. W. Hobbs, (2004) "The Oxidation Behavior of Y2O3-Dispersed b-NiAl," Oxidation of Metals, v. 61, p. 273-92.
  87. J. A. Haynes, B. A. Pint, W. D. Porter and I. G. Wright, (2004) "Comparison of Thermal Expansion and Oxidation Behavior of Various High-Temperature Coating Materials and Superalloys," Materials at High Temperature, v. 21 p. 87-94.
  88. B. A. Pint, L. R. Walker and I. G. Wright, (2004) "Characterization of the Breakaway Al Content in Alumina-Forming Alloys," Materials at High Temperature, v. 21 p. 175-85.
  89. B. A. Pint, K. L. More and I. G. Wright, (2003) "The Use of Two Reactive Elements to Optimize Oxidation Performance of Alumina-Forming Alloys" Materials at High Temperature, v. 20, p. 375-86.
  90. "Optimization of Reactive Element Additions to Improve Oxidation Performance of Alumina­Forming Alloys," special issue on Science & Technology of Alumina of the Journal of the American Ceramic Society, v. 86, p. 686-95 (2003).
  91. B. A. Pint, Y. Zhang, P. F. Tortorelli, J. A. Haynes and I. G. Wright, (2002) "Defining Failure Criteria for Extended Lifetime Metallic Coatings," Proc. Sixteenth Annual Conf. Fossil Energy Materials, R. R. Judkins (comp.) U. S. Department of Energy.
  92. B. A. Pint, K. L. More, P. F. Tortorelli and I. G. Wright, "Effect of Water Vapor on Oxide Scale Microstructure," Materials at High Temperatures.
  93. R. Peraldi and B. A. Pint, (2004) "Effect of Cr and Ni Contents on the Oxidation Behavior of Ferritic and Austenitic Model Alloys in Air With Water Vapor," Oxidation of Metals v. 61, p. 463-83.
  94. Y. Zhang, B. A. Pint, J. A. Haynes, I. G. Wright and P. F. Tortorelli, (2004) "The Effect of Water Vapor on the Oxidation Behavior of CVD Iron Aluminide Coatings," Oxidation of Metals, v. 62, p. 103-120.
  95. B. A. Pint, L. R. Walker and I. G. Wright, (2002) "EPMA Characterization of Residual Al Content in Oxidized High-Temperature Alloys," Microscopy and Microanalysis 2002, Quebec, Canada, August 2002.
  96. B. A. Pint, (2003) "Progress in Understanding the Reactive Element Effect Since the Whittle and Stringer Literature Review," in Proc. John Stringer Symposium on High Temperature Corrosion, P. F. Tortorelli, I. G. Wright, and P. Y. Hou (eds.), ASM International, Materials Park, OH, pp. 9-19.
  97. B. A. Pint, K. L. More and P. F. Tortorelli, (2002) "The Effect of Water Vapor on Oxidation Performance of Alloys Used in Recuperators," ASME Paper #2002-GT-30543, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Amsterdam, Netherlands, June 3-6, 2002.
  98. B. A. Pint and I. G. Wright, (2002) "Long-Term High Temperature Oxidation Behavior of ODS Ferritics," Journal of Nuclear Materials., v. 307-311, p. 763-8.
  99. B. A. Pint, J. H. DeVan and J. R. DiStefano, (2002) "Temperature Limits on Compatibility of Insulating Ceramics in Lithium," Journal of Nuclear Materials., v. 307-311, p. 1344-50.
  100. B. A. Pint and J. R. DiStefano, (2002) "Oxygen Embrittlement of Vanadium Alloys With and Without Surface Oxide Formation," Journal of Nuclear Materials., v. 307-311, p. 560-5.
  101. B. A. Pint, K. L. More and I. G. Wright, “Effect of Precious Metals on the Oxidation Performance of NiAl,” Oxidation of Metals.
  102. I. G. Wright and B. A. Pint, (2002) "An Assessment of the High-Temperature Oxidation Behavior of Fe-Cr Steels in Water Vapor and Steam," NACE Paper 02-377, Houston, TX, presented at NACE Corrosion 2002, Denver, CO, March 2002.
  103. J. A. Haynes, M. J. Lance, B. A. Pint and I. G. Wright, (2001) "Characterization of Commercial EB­PVD TBC Systems with CVD (Ni,Pt)Al Bond Coatings," Surface & Coatings Technology, v. 146-7, p. 140-6.
  104. J. A. Haynes, M. J. Lance, B. A. Pint and I. G. Wright, (2001) "Characterization of Commercial EB­PVD TBC Systems with CVD (Ni,Pt)Al Bond Coatings," in N. B. Dahotre, J. M. Hampikian and J. E. Morral eds., Elevated Temperature Coatings: Science and Technology IV, TMS Symp. Proc., Warrendale, PA, p. 29-44.
  105. B. A. Pint, K. L. More and I. G. Wright, (2003) "The Effect of Quaternary Additions on the Oxidation Behavior of Hf-doped NiAl," Oxidation of Metals, v. 59, p. 257-283.
  106. B. A. Pint, Y. Zhang, P. F. Tortorelli, J. A. Haynes and I. G. Wright, (2001) "Evaluation of Iron-Aluminide CVD Coatings for High Temperature Corrosion Protection," Materials at High Temperature, v. 18, p. 185-192.
  107. C. Leyens, I. G. Wright and B. A. Pint, (2001) "Hot Corrosion of Nickel-Base Alloys by Alkali-Containing Sulfate Deposits," Materials Science Forum, v. 369-372, p. 571-8.
  108. I. G. Wright, B. A. Pint, L. M. Hall and P. F. Tortorelli, (2001) "Experimental Results and Modeling Related to Oxidation Lifetimes," in M. Schütze, W. J. Quadakkers, J. R. Nicholls eds., Lifetime Modelling of High Temperature Corrosion Processes, EFC Workshop Proceedings, Maney, London,p. 339-58.88
  109. O. O. Omatete, P. J. Maziasz, B. A. Pint and D. P. Stinton, (2000) "Assessment of Recupertor Materials for Microturbines," Report # ORNL/TM-2000/304, Oak Ridge National Laboratory, Oak Ridge, TN.
  110. K. L. More, D. W. Coffey, B. A. Pint, K. S. Trent, and P. F. Tortorelli, (2000) "TEM Specimen Preparation of Oxidized Ni-Base Alloys Using the Focused Ion Beam Technique," in Proceedings: Microscopy & Microanalysis 2000, Volume 6, Supplement 2, G.W. Bailey, et al., eds., Springer-Verlag, NY, p. 540-1.
  111. E. C. Dickey, K. B. Alexander and B. A. Pint, (1998) "Interfacial Solute-Atom Segregation: An Atomic-Scale Phenomenon with Implications for the Oxidation Kinetics of Pt-Al Alloys," Proceedings of the 14th International Congress on Electron Microscopy, Vol. II, H. A. Calderón Benavides and M. J. Yacamán, eds., Institute of Physics Publishing, Philadelphia, PA, p. 770-1.
  112. B. A. Pint, P. F. Tortorelli, I. G. Wright, J. A. Haynes and W. Y. Lee, (2000) "Evaluation of Iron Aluminide Coatings for High-Temperature Corrosion Protection," Proc. Fourteenth Annual Conf. Fossil Energy Materials, R. R. Judkins (comp.) U. S. Department of Energy, 2000.
  113. B. A. Pint, P. F. Tortorelli and I. G. Wright, (2002) "Effect of Cycle Frequency on High Temperature Oxidation Behavior of Alumina-Forming Alloys," Oxidation of Metals, v. 58, p. 73-101.
  114. B. A. Pint, R. W. Swindeman, K. L. More and P. F. Tortorelli, (2001) "Materials Selection for High Temperature (750°-1000°C) Metallic Recuperators for Improved Efficiency Microturbines," ASME Paper #2001-GT-445, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, New Orleans, LA, June 4-7, 2001.
  115. I. G. Wright, B. A. Pint and P. F. Tortorelli, (2001) "The High Temperature Oxidation Behavior of ODS Fe3Al," Oxidation of Metals, v. 55, p. 333-57.
  116. Y. Zhang, J. A. Haynes, W. Y. Lee, I. G. Wright, B. A. Pint, K. M. Cooley and P. K. Liaw, (2001) "Effects of Pt Incorporation on the Isothermal Oxidation Behavior of CVD Aluminide Bond Coatings," Metallurgical Transactions., v. 32A, p. 1727-41.
  117. B. A. Pint, L. D. Chitwood and J. R. DiStefano, (2001) "Long-Term Stability of Ceramics in Liquid Lithium," Journal of Nuclear Materials, v.289, p.52-56; presented at the 102nd Annual Meeting of the American Ceramic Society, St Louis, MO, May 2000.
  118. J. A. Haynes, K. L. More, B. A. Pint, I. G. Wright, K. Cooley and Y. Zhang, (2001) "Effects of Platinum Additions on the Adherence of Alumina Scales to CVD Aluminide Bond Coatings," Materials Science Forum, v. 369-372, p. 679-86.
  119. P. F. Tortorelli, B. A. Pint, E. A. Kenik, K. L. More and I. G. Wright, (2001) "Oxide Defects and Damage Processes in Iron-Based Alumina-Formers," Materials Science Forum, v. 369-372, p. 337-44.
  120. J. L. Smialek and B. A. Pint, (2001) "Optimizing Scale Adhesion for Single Crystal Superalloys," Mater. Sci. Forum, v. 369-372, p. 459-66.  Oral presentation at the 5th International Symposium on High Temperature Corrosion and Protection of Materials, Les Embiez, France, May 2000.
  121. B. A. Pint, K. L. More, P. F. Tortorelli, W. D. Porter and I. G. Wright, (2001) "Optimizing the Imperfect Oxidation Performance of Iron Aluminides," Materials Science Forum, v. 369­372, p. 411-8.  Poster presentation at the 5th International Symposium on High Temperature Corrosion and Protection of Materials, Les Embiez, France, May 2000.
  122. K. B. Alexander, K. Prüßner, B. A. Pint and P. F. Tortorelli, (1998) "The Effect of Reactive-Element Alloying Additions on the Microstructure and Microchemistry of Thermally-Grown Oxide Scales on Nickel-Based Alloys," Proceedings of the 14th International Congress on Electron Microscopy, Vol. II, H. A. Calderón Benavides and M. J. Yacamán, eds., Institute of Physics Publishing, Philadelphia, PA, p. 35-36.
  123. A. A. Wereszczak, M. Karakus, K. C. Liu, B. A. Pint, R. E. Moore and T. P. Kirkland, (1999) "Compressive Creep Performance and High Temperature Dimensional Stability of Conventional Silica Refractories," Report ORNL/TM-13757, Oak Ridge National Laboratory, Oak Ridge, TN.
  124. C. Leyens, B. A. Pint and I. G.Wright, (2000) "Effects of Composition on the Oxidation and Hot Corrosion Resistance of NiAl Doped with Precious Metals," Surface and Coatings Technology, v. 133-134, p. 15-22.
  125. C. Leyens, I. G. Wright and B. A. Pint, (2000) "Hot-Corrosion of an EB-PVD Thermal Barrier Coating System at 950°C," Oxidation of Metals , v. 54, p. 401-24.
  126. J. R. DiStefano, B. A. Pint and J. H. DeVan, (2000) "Oxidation of Refractory Metals in Air and Low Pressure Oxygen Gas," International Journal of Refractory Metals & Hard Materials, v. 18, p. 237-43.TMS Fall 1999.
  127. D. T. Hoelzer, B. A. Pint and I. G. Wright, (2000) "A Microstructural Study of the Oxide Scale Formation on an ODS Fe-13Cr Alloy," Journal of Nuclear Materials, v. 283-7, p. 1306-10.
  128. J. R. DiStefano, B. A. Pint, J. H. DeVan, H. D. Röhrig and L. D. Chitwood, (2000) "Effects of Oxygen and Hydrogen at Low Pressure on the Mechanical Properties of Vanadium Alloys," Journal of Nuclear Materials, v.283-287, p.841-5. Poster presentation at ICFRM-9, Colorado Springs, CO, October 1999.
  129. C. Leyens, I. G. Wright and B. A. Pint, (2000) "Effect of Experimental Procedures on the Cyclic, Hot Corrosion Behavior of NiCoCrAlY-Type Bondcoat Alloys," Oxidation of Metals , v. 54, p. 255-76.
  130. B. A. Pint, C. Leyens, J. R. Regina, P. F. Tortorelli, and I. G. Wright, "High-Temperature Corrosion Behavior of Iron Aluminide Alloys and Coatings," paper 1.3 in Proc. Thirteenth Annual Conf. Fossil Energy Materials, R. R. Judkins (comp.) U. S. Department of Energy, 1999.
  131. C. Leyens, B. A. Pint and I. G.Wright, (2000) "Effects of Composition on the Hot Corrosion Resistance of NiAl and (Ni,Pt)Al," NACE Paper 00-260, Houston, TX, presented at NACE Corrosion 2000, Orlando, FL, March 2000.
  132. J. M. Rakowski and B. A. Pint, (2000) "Observations on the Effect of Water Vapor on the Elevated Temperature Oxidation of Austenitic Stainless Steel Foil," NACE Paper 00-517, Houston, TX, presented at NACE Corrosion 2000, Orlando, FL, March 2000.
  133. B. A. Pint and J. M. Rakowski, (2000) "Effect of Water Vapor on the Oxidation Resistance of Stainless Steels," NACE Paper 00-259, Houston, TX, presented at NACE Corrosion 2000, Orlando, FL, March 2000.
  134. B. A. Pint, J. A. Haynes, K. L. More, I. G. Wright and C. Leyens, (2000) "Compositional Effects on Aluminide Oxidation Performance:  Objectives for Improved Bond Coats," in T. M. Pollock, R. D. Kissinger, R. R. Bowman, K. A. Green, M. McLean, S. Olson and J. J. Shirra eds., Superalloys 2000, TMS, Warrendale, PA, p. 629-38.
  135. B. A. Pint, K. L. More, I. G. Wright and P. F. Tortorelli, (2000) "Characterization of Thermally Cycled Alumina Scales," Materials at High Temperature, v. 17, p. 165-71.
  136. C. Leyens, U. Schulz, B. A. Pint and I. G. Wright, (1999) "Influence of Electron Beam Physical Vapor Deposited Thermal Barrier Coating Microstructure on Thermal Barrier Coating System Performance Under Cyclic Oxidation Conditions," Surface and Coatings Technology, v. 120-121, p. 68-76.
  137. J. A. Haynes, Y Zhang, W. Lee, B. Pint, I. Wright and K. M. Cooley, (1999) "Effects of Pt Additions and S Impurities on the Microstructure and Scale Adhesion Behavior of Single-Phase CVD Aluminide Bond Coatings," in J. M. Hampikian and N. B. Dahotre eds., Elevated Temperature Coatings: Science and Technology III, TMS Symp. Proc., Warrendale, PA, p. 185­96.
  138. C. Leyens, I. G. Wright and B. A. Pint, (1999) "Hot Corrosion of Ni-Base Alloys in Biomass Derived Fuel Simulated Atmosphere," in J. M. Hampikian and N. B. Dahotre eds., Elevated Temperature Coatings: Science and Technology III, TMS Symp. Proc., Warrendale, PA, p. 79-90.
  139. C. Leyens, I. G. Wright, B. A. Pint and P. F. Tortorelli, (1999) "Significance of Experimental Procedures on the Hot Corrosion Behavior of Nickel-Base Alloys Under Cyclic Conditions," in M. Schütze and W. J. Quadakkers eds., Cyclic Oxidation of High Temperature Materials, The Institute of Materials, London, p. 169-86.
  140. B. A. Pint, P. F. Tortorelli and I. G. Wright, (1999) "Effect of Cycle Frequency on High Temperature Oxidation Behavior of Alumina- and Chromia-Forming Alloys," in M. Schütze and W. J. Quadakkers eds., Cyclic Oxidation of High Temperature Materials, The Institute of Materials, London, p. 111-32.
  141. E. C. Dickey, B. A. Pint, K. B. Alexander and I. G. Wright, (1999) "Oxidation Behavior of Platinum-Aluminum Alloys and the Effect of Zr-Doping," Journal of Materials Research, v. 14, p. 4531-40.
  142. B. A. Pint, J. R. Regina, K. Prüßner, L. D. Chitwood, K. B. Alexander and P. F. Tortorelli, (2001) "Effect of Environment on the Oxidation of Ingot-Processed Iron Aluminides," Intermetallics, v. 9(8), p. 735-9.
  143. M. P. Brady, B. A. Pint, P. F. Tortorelli, I. G. Wright, and R. J. Hanrahan, (2000) "High-Temperature Oxidation and Corrosion of Intermetallics," in Materials Science and Technology: A Comprehensive Treatment, Vol.19B, Corrosion and Environmental Degradation of Materials, Wiley-VCH, Weinheim, Germany, p. 229-325.
  144. B. A. Pint, A. J. Garratt-Reed and L. W. Hobbs, (2001) "Analytical Electron Microscopy Study of the Breakdown of a-Al2O3 Scales Formed on Oxide Dispersion Strengthened Alloys," Oxidation of Metals , v. 56, p. 119-45.
  145. B. A. Pint, I. G. Wright and W. J. Brindley, (2000) "Evaluation of TBC Systems on Novel Substrates," Journal of Thermal Spray Technology, v.9(2) p.198-203; and Gas Turbine Materials Technology, ASM Conf. Proc. (1999), p.81-86; presentation at ASM meeting, Rosemont, IL, October, 1998.
  146. Y. Zhang, W. Y. Lee, J. A. Haynes, I. G. Wright, B. A. Pint, K. M. Cooley and P. K. Liaw, (1999) "Synthesis and Cyclic Oxidation Behavior of a (Ni,Pt)Al Coating on a Desulfurized Ni­base Superalloy," Metallurgical Transactions A , v. 30A. p. 2679-87.
  147. B. Somieski, L. D. Hulett, J. Xu, B. A. Pint, P. F. Tortorelli, B. Nielsen, P. Asoka-Kumar, R. Suzuki and T. Ohdaira, (1999) "Microstructure of Thermally-Grown and Deposited Alumina Films Probed with Positrons" Physical Review B, v. 59, p. 6675-88.
  148. B. A. Pint and I. G. Wright, (1998) "Cyclic Oxidation Behavior of Cast NiCrAl Alloys," in P. Y. Hou, M. J. McNallan, R. Oltra, E. J. Opila and D. A. Shores eds., High Temperature Corrosion and Materials Chemistry, Electrochem. Soc. Proc. v. 98-9, p. 263-74, presentation at the Spring Meeting of the Electrochemical Society, San Diego, CA, May 1998.
  149. B. A. Pint, K. B. Alexander, O. R. Monteiro and I. G. Brown, (1998) "An Oxygen Potential Gradient as a Possible Diffusion Driving Force," in Y. Mishin,  G. Vogl, N. Cowern, R. Catlow and D. Farkas eds., Diffusion Mechanisms in Crystalline Materials, Symp. Proc. v.527, MRS, Pittsburgh, PA, p.497-502; poster presentation at the Spring Meeting of the Materials Research Society, San Francisco, CA, April, 1998.
  150. B. A. Pint, J. Leibowitz and J. H. DeVan, (1999) "The Effect of an Oxide Dispersion on the Critical Al Content in Fe-Al Alloys," Oxidation of Metals. v. 51, p. 181-97.
  151. I. G. Wright, B. A. Pint, W. Y. Lee, K. B. Alexander and K. Prüßner, (2000) "Some Effects of Metallic Substrate Composition on Degradation of Thermal Barrier Coatings," in J. Nicholls and D. Rickerby, eds., High Temperature Surface Engineering, Institute of Materials, London, UK, p. 95-113.
  152. E. C. Dickey, B. A. Pint, K. B. Alexander and I. G. Wright, (2000) "The Effect of Platinum on the Growth and Adhesion of a-Al2O3 Scales," in J. Nicholls and D. Rickerby, eds., High Temperature Surface Engineering, Institute of Materials, London, UK, p. 115-28.
  153. W. Y. Lee, Y. Zhang, I. G. Wright, B. A. Pint and P. K. Liaw, (1998) "Effects of Sulfur Impurity on the Scale Adhesion Behavior of a Desulfurized Ni-based Superalloy Aluminized by Chemical Vapor Deposition," Metallurgical Transactions A, v. 29A, p. 833-41.
  154. B. A. Pint, P. F. Tortorelli and I. G. Wright, (1999) "Long-Term Oxidation Performance of Ingot-Produced Fe3Al Alloys," Materials at High Temperature, v. 16, p. 1-13.
  155. J. Xu, B. Somieski, L. D. Hulett, B. A. Pint and P. F. Tortorelli, (1997) "Micro Defects in Al2O3 Films and Interfaces Revealed by Positron Lifetime Spectroscopy," Applied Physics Letters, v. 71 (21), p. 3165-7. 24  November 1997.
  156. B. A. Pint and K. B. Alexander, (1998) "Grain Boundary Segregation of Cation Dopants in a­Al2O3 Scales," Journal of the Electrochemical Society, v. 145, p. 1819-29.
  157. B. A. Pint, I. G. Wright, W. Y. Lee, Y. Zhang, K. Prüßner and K. B. Alexander, (1998) "Substrate and Bond Coat Compositions:  Factors Affecting Alumina Scale Adhesion," Materials  Science and Engineering, v. A245, p. 201-211.
  158. B. A. Pint, (1998) "The Oxidation Behavior of Oxide-Dispersed b-NiAl:  I.  Short-Term Cyclic Data and Scale Morphology," Oxidation of Metals, v. 49, p. 531-60.
  159. B. A. Pint, A. J. Garratt-Reed and L. W. Hobbs, (1998) "A Possible Role of the Oxygen Potential Gradient in Enhancing Diffusion of Foreign Ions on a-Al2O3 Grain Boundaries," Journal of the American Ceramic Society, v. 81, p. 305-14.
  160. B. A. Pint and K. B. Alexander, (1996) "Grain Boundary Segregation of Cation Dopants in a­Al2O3 Scales," in D. A. Shores, R. A. Rapp and P. Y. Hou eds., Fundamental Aspects of High Temperature Corrosion VI, Electrochem. Soc. Proc. v. 96-26, p. 97-108, presentation Fall meeting of the Electrochemical Society, San Antonio, TX, October 1996.
  161. P. F. Tortorelli and B. A. Pint, (1996) "Oxidation Behavior of Cr-Cr2Nb Alloys," in D. A. Shores, et al. eds., Fundamental Aspects of High Temp. Corrosion, Electrochem. Soc. Proc. v. 96-26, p. 74-85.
  162. B. A. Pint and K. B. Alexander, (1997) "Foreign Ion Segregation on Al2O3 Scale Grain Boundaries," in S. B. Newcomb and J. A. Little, Microscopy of Oxidation-3, Institute of Metals, London, p. 153-65.
  163. B. A. Pint, (1997) "On the Formation of Interfacial and Internal Voids in a-Al2O3 Scales," Oxidation of Metals, v. 48, p. 303-28.
  164. B. A. Pint, P. F. Tortorelli and I. G. Wright, (1996) "The Oxidation Behavior of ODS Iron Aluminides," Werkstoffe und Korrosion, v. 47, p. 663-74.
  165. I. G. Wright, B. A. Pint, C. S. Simpson and P. F. Tortorelli, (1997) "High-Temperature Oxidation Life Characteristics of ODS Fe3Al," Materials Science Forum, v. 251-4, p. 195-202.
  166. B. A. Pint, (1997) "Study of the Reactive Element Effect in ODS Iron-Base Alumina-Formers," Materials Science Forum, v.251-4, p.397-404;  presented at the 4th International Symposium on High Temperature Corrosion, Les Embiez, France, May 1996.
  167. B. A. Pint, B. A. Nagaraj, and M. A. Rosenzweig, (1996) "Evaluation of TBC-Coated b-NiAl Substrates Without a Bond Coat," in N. B. Dahotre, J. M. Hampikian, and J. J. Stiglich eds., Elevated Temperature Coatings: Science and Technology II, TMS Symp. Proc., p.163-74; presented at TMS Annual meeting, Anaheim, CA, February 1996.
  168. B. A. Pint, M. Treska and L. W. Hobbs, (1997) "The Effect of Various Oxide Dispersions on the Phase Composition and Morphology of Al2O3 Scales Grown on b-NiAl," Oxidation of Metals, v. 47, p. 1-20.
  169. B. A. Pint, (1997) "Characterization of the High Temperature Oxidation of a TBC-Coated Oxide-Dispersed b-NiAl Substrate," Materials at High Temperature, v. 14, p. 403-12.
  170. B. A. Pint, (1996) "Experimental Observations in Support of the Dynamic Segregation Theory to Explain the Reactive Element Effect," Oxidation of Metals, v. 45, p. 1-37.
  171. B. A. Pint, J. R. Martin and L. W. Hobbs, (1995) "The Oxidation Mechanism of q-Al2O3 Scales," Solid State Ionics, v. 78, p. 99-107.
  172. B. A. Pint, A. J. Garratt-Reed and L. W. Hobbs, (1995) "The Reactive Element Effect in Commercial ODS FeCrAl Alloys," Materials at High Temperature, v. 13, p. 3-16.
  173. B. A. Pint, K. B. Alexander and P. F. Tortorelli, (1995) "The Effect of Various Oxide Dispersions on the Oxidation Resistance of Fe3Al," in J. Horton, S. Hanada, I. Baker, R. D. Noebe and D. Schwartz, eds., High Temperature Ordered Intermetallics VI, Symp. Proc. v. 364, MRS, Pittsburgh, PA, p. 1315-20; presentation MRS Fall meeting, Boston, MA, December 1994.
  174. B. A. Pint and L. W. Hobbs, (1995) "The Cyclic Oxidation Behavior of Oxide-Dispersed b-NiAl," in J. Horton, S. Hanada, I. Baker, R. D. Noebe and D. Schwartz, eds., High Temperature Ordered Intermetallics VI, Symp. Proc. v. 364, MRS, Pittsburgh, PA, p. 987-92; presentation MRS Fall meeting, Boston, MA, December 1994.
  175. B. A. Pint, (1994) "Characterization of the Oxidation Behavior of TiO2-Dispersed b-NiAl," Electrochemical Society Extended Abstracts, v. 94-2, p. 835-6, presentation at the Fall meeting of the Electrochemical Society, Miami, FL, October 1994.
  176. "Limitations on the Use of Surface Doping for Improving High-Temperature Oxidation Resistance," MRS Bulletin, v.19(10), p.26-30 (1994). 21
  177. B. A. Pint and L. W. Hobbs, (1994) "The Formation of a-Al2O3 Scales at 1500°C," Oxidation of Metals, v. 41, p. 203-233.
  178. K. B. Alexander and B. A. Pint, (1994) "The Effect of Reactive Elements on the Segregation Behavior and Microstructure of a-Al2O3 Scales on b-NiAl," in G. W. Bailey and C. L. Reider eds., Proceedings of the 52nd Annual Meeting of the Microscopy Society of America, San Francisco Press, San Francisco, CA, p. 418-9.
  179. B. A. Pint and L. W. Hobbs, (1993) "The Formation of a-Al2O3 Scales on b-NiAl at 1400° and 1500°C," Electrochemical Society Extended Abstracts, v. 93-2, p. 676-7, presentation at the Fall meeting of the Electrochemical Society, New Orleans, LA, October 1993.
  180. B. A. Pint, A. J. Garratt-Reed and L. W. Hobbs, (1993) "The Effect of Oxidation Time on the Grain Boundary Segregation of Zr in a-Al2O3 Scales Grown on b-NiAl," Electrochemical Society Extended Abstracts, v. 93-2, p. 678-9, presentation at the  Fall meeting of the Electrochemical Society, New Orleans, LA, October 1993.
  181. B. A. Pint, A. J. Garratt-Reed and L. W. Hobbs, (1993) "Analytical Electron Microscopy Study of the Breakdown of Alumina Scales on Oxide Dispersion Strengthened Alloys," presentation at the Fall ASM meeting, Pittsburgh, PA, October 1993.
  182.  B. A. Pint, B. M. Banks, J. C. Duncan, A. J. Garratt-Reed and L. W. Hobbs, (1993) "Characterization of the Oxidation-Sulfidation of a Preoxidized ODS FeCrAl Alloy" in G. W. Bailey and C. L. Reider ed., Proceedings of the 51st Annual Meeting of the Microscopy Society of America, San Francisco Press, San Francisco, CA, p. 1146-7.
  183. B. A. Pint, A. J. Garratt-Reed and L. W. Hobbs, (1993) "The Effect of Time and Temperature on the Segregation of Foreign Ions to Grain Boundaries in Growing a-Al2O3 Scales," in G. W. Bailey and C. L. Reider eds., Proceedings of the 51st Annual Meeting of the Microscopy Society of America, San Francisco Press, San Francisco, CA, p. 950-1.
  184. B. A. Pint, A. J. Garratt-Reed and L. W. Hobbs, (1993) "The Effect of a Zr Alloy Addition on the Oxidation Behavior of b-NiAl: The Transition from Benefit to Breakdown", in S. B. Newcomb and M. J. Bennett eds., Proceedings of the 2nd International Conference on the Microscopy of Oxidation, p. 463-75, presentation Cambridge, U.K., March 1993.
  185. B. A. Pint, A. J. Garratt-Reed and L. W. Hobbs, (1993) "Analytical Electron Microscopy Study of the Duplex Scale Formed on an ODS Ni3Al Alloy", in S. B. Newcomb and M. J. Bennett eds., Proceedings of the 2nd International Conference on the Microscopy of Oxidation, p. 423-34, presentation Cambridge, U.K., March 1993.
  186. B. A. Pint and L. W. Hobbs, (1994) "Limitations on the Use of Ion Implantation for the Study of the Reactive Element Effect in b-NiAl," Journal of the Electrochemical Society, v. 141, p. 2443­53; presentation at Spring meeting of the Electrochemical Society, Honolulu, Hawaii, May 1993.
  187. B. A. Pint and L. W. Hobbs, (1993) "The Dynamic Role of Interfacial Segregation in High Temperature Oxidation," Electrochemical Society Extended Abstracts, v. 93-1, p. 1707-8, presentation at the Spring meeting of the Electrochemical Society, Honolulu, Hawaii, May 1993.
  188. B. A. Pint, A. Jain and L. W. Hobbs, (1993) "The Effect of Ion Implanted Species on the q to a Phase Transformation of Al2O3 Scales Grown on b-NiAl," in I. Baker, R. Darolia, J. D. Whittenberger and M. H. Yoo eds., High Temperature Ordered Intermetallics V, Symp. Proc. v. 288, MRS, Pittsburgh, PA, p. 1013-8; poster presentation MRS Fall meeting, Boston, MA, December 1992.
  189. B. A. Pint, J. R. Martin and L. W. Hobbs, (1993) "18O/SIMS Characterization of the Growth Mechanism of Doped and Undoped a-Al2O3," Oxidation of Metals, v. 39, p. 167-95.
  190. B. A. Pint and L. W. Hobbs, (1992) "The Oxidation Behavior of Y2O3-Dispersed Ni3Al," in B. R. MacDougall, et al. eds., Oxide Films on Metals and Alloys, Electrochem. Soc. Proc. v. 92-22, p. 92-100, presentation Fall meeting of the Electrochemical Society, Toronto, Ont., October 1992.
  191. B. A. Pint, A. J. Garratt-Reed and L. W. Hobbs, (1993) "The Effect of Y and Ti on FeCrAl Oxidation at 1400°C," in Proc. 3rd International Symp. on High Temp. Corrosion and Protection of Materials, J. Physique IV, v. 3, p. 247-55.
  192. B. A. Pint and L. W. Hobbs, (1991) "The Effects of Ion Implanted Yttrium on the Oxidation Mechanism of b-NiAl," Electrochemical Society Extended Abstracts, v. 91-2, p. 915-6, presentation at the Fall meeting of the Electrochemical Society, Phoenix, AZ, October 1991.
  193. B. A. Pint, K. C. Wills, A. J. Garratt-Reed, and L. W. Hobbs, (1991) "The Reactive Element Effect in Commercial FeCrAl Alloys," Electrochemical Society Extended Abstracts, v. 91-2, p. 913-4, presentation at the Fall meeting of the Electrochemical Society, Phoenix, AZ, October 1991.
  194. B. A. Pint, A. Jain, and L. W. Hobbs, (1991) "The Effect of Yttrium Ion Implantation on the High Temperature Oxidation Properties of NiAl," in L. A. Johnson, D. P. Pope and J. O. Steigler eds., High Temperature Ordered Intermetallics IV, Symp. Proc. v. 213, MRS, Pittsburgh, PA, p. 981-6; poster presentation at the MRS Fall meeting, Boston, MA, December 1990.
  195.  K. Przybylski, A. J. Garratt-Reed, B. A. Pint, E. P. Katz, and G. J. Yurek, (1987) "Segregation of Y to Grain Boundaries in the Al2O3 Scale Formed on an ODS Alloy," Journal of the Electrochemical Society, v. 134, p. 3207-8.
  196. D. W. Hetzner and B. A. Pint, (1988) "Sulfur Content, Inclusion Chemistry, and Inclusion Size Distribution in Calcium Treated 4140 Steel," in R. Rungta ed., Inclusions and Their Influence on Mechanical Behavior, ASM, Materials Park, OH, p. 35-48.
  197. B. A. Pint, (1992) "The Effect of Reactive Elements on the Growth of Al2O3 Scales," Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA.