Advanced Wall Systems

ORNL
Home
ASTM
Testing
BEP
Home
Related
Sites
Work With
Us
Advanced Wall
Systems Home

Hotbox Test R-value Database

Thermomass Panel

 

Introduction

The THERMOMASS Building Insulation System is a unique, patented, pre-engineered, insulated concrete sandwich wall system developed, manufactured and supplied by Composite Technologies Corporation (CTC).

The basic components of the THERMOMASS system are 2-in. thick layer of extruded polystyrene insulation installed between two 3-in. thick layers of concrete. These three layers are held together by CTC-manufactured, high-strength, fiber-composite connectors installed on a 16-in. grid.

Thermal conductivities of the panel concrete and extruded polystyrene foam were tested by ORNL BTC Laboratory using hot plate apparatus - ASTM C 518-91. Thermal conductivity of foam at mean temp. 50 deg. F was k a = 0.2 Btu-in./hft 2F. Thermal conductivity of concrete was k a = 9.09 Btu-in./hft 2F.

 

 
Experimental Work Theoretical Analysis Computer Simulations Hotbox Test R-value Database Interactive Calculators Novel Technologies
©2004 Oak Ridge National Laboratory

Contact Us